 |
   |
    |
|
PRECISION 28000 Signal Conditioning System
|
Backplane Interface Card (BIF)
Option F provides Factory Acceptance Test (FAT) and Go/No-Go Test (GNG) hardware and GUI software support for all 28000 transducer conditioning cards. Control to the 28000 system is by either the supplied GUI or via a remote connection using high-level commands over the 10baseT Ethernet interface. The RS-232 serial interface supports control of the system from the GUI software operating on a Windows compatible PC. Up to eight 28000 systems can be operated from a single controller. An alarm indicator on the BIF front panel identifies system problems such as an over-temperature condition, a cooling fan failure, or faulty power supply voltages. The BIF front panel TEST BUS connector provides a means to connect an external test signal to the system’s test bus. The front panel BNC MONITOR connector may be used with a scope or other measurement device for viewing the output of a selected channel. The rear panel OUTPUT MONITOR connector is intended for use by the 28000-4-TEST test subsystem DVM. System status and communication status LEDs are located on the front panel.
|
PRECISION 28000 Signal Conditioning System Overview 28000 System Components Backplane |
The
28000C-BIF1-T backplane interface card (BIF) provides communication and control
support to the 28000 system. The Graphical User Interface (GUI) control program
is included with the
BIF.
|
|
